My own personal critic

The other day I received a lovely little pack of blue and black beads in the post, just perfect for adding a little bit of sparkle to a bracelet. I still have the elastic cord I borrowed from my friend, so last night, while watching tv, I started to experiment with stringing the beads on the cord in various combinations. What I ended up with is a bracelet consisting of my flowers beads and some little blue bicone beads. Since making it I have gazed at the finished bracelet for some time and decided that something is not quite right. Yes the colours match quite nicely, the cord is about right to grip around my wrist, but something is nagging me. It's the voice of my personal critic.

I finally worked out what the problem was. It's the beads I made that I'm not happy with. The finish is just not good enough. In truth there is no finish to speak of. To start with I didn't measure the clay to make the beads, so they vary very slightly in size. Secondly, I think I should have sliced the flower cane much thinner. The beads with the thick slices have not been smoothed enough and so you can see where I have added the slices. Thirdly, I should not have used the transparent clay for ther base bead.

What I really need to do is stop procrastinating and start sanding. Now that I know where I have gone wrong I can repeat the process again and hopefully end up with something better. By chance I found a very useful FAQ page with tips on finishing beads.

Flower beads

Yesterday I had the whole day to myself (how lovely!) and decided to make good use of the time to do some clay work. So with the aim of actually creating a complete bracelet, I decided to use the flower cane I have already made to make some beads. This part of the process is fairly easy. Cut some small pieces of transparent clay for the base bead and then roll in the palms of your hands to make a simple round bead. I made about 10 beads. I then sliced a short piece out of my flower cane and used that to reduce to a smaller size. I do this by squeezing lightly round and round the cane to make it smaller.

After the reduction I started slicing the end off the cane as thinly as I could, although to be honest, sometimes I think it could have been a lot finer. I had to be fairly careful about this because at times I still get some drag, which flattens the flower, but by some gentle squeezing back into shape this wasn't too problematic. On each bead I placed three slices of cane roughly a third way round the bead. This gives a nice even distribution and also leaves some gaps for poking the hole through. I am still using the cocktail sticks for poking the holes.

Here comes my unexpected pleasure of seeing the final beads, followed closely by mild disappointment. Seeing my final beads I was astonished how good they looked for something fairly simple. And I felt a certain pride in what I had achieved. That was until after I retrieved them from the oven. When they were finally baked the transparent clay obviously is no longer white, but at the same time not transparent either. In fact they came out with a slightly yellowish tinge. I have read that clay can go yellow in the oven, but I have never seen it so far until now. I think the real problem is with the transparent clay and I am starting to think that I should have used plain white. In fact I may redo this whole exercise in white to compare.

I did manage to finally string the beads on the elastic cord that my friend gave me, but 10 beads are certainly not enough to go around my wrist. So I am now waiting for a bulk of beads to arrive in the post which should supplement the bracelet and make it more attractive.

My first flower cane

I count this as my first real flower cane (even though I managed to make the petal cane earlier and also tried to make the rather unsuccessful orchid cane of my own design).

This lesson grabbed my eye while I was surfing around Flickr looking at the wonderful creations posted on one of the Polymer clay groups. To be honest I'm not sure that looking at other people's work is a good idea or not, as it can make me feel equally inspired or despondent depending on my mood.

Unexpectedly I discovered one woman's photostream which included tutorials in the form of pictures. This is a nice way to follow the tutorial because it is simple and makes it look strangely easy. I decided to try this Blue flower cane tutorial.

With my lovely new packs of clay I decided to recreate the flower cane, choosing brilliant blue, white and a lilac mix I have left over. Making the skinner blend has become quite easy, although I still managed to mess it up a little bit and had to press it back into an equal layer for rolling. I now use my pasta machine for this as it does make life easier. This skinner blend had a double gradient ie with blue on the edges of the strip and white in the middle, which you then roll up into a cane. I feel pretty confident now making the petal design, it's such a great way to make the veining of the petals.

This time I took more care in constructing the flower, but the bit that I didn't take so much care with was the centre of the flower which is supposed to be made out of a simple lace cane. For the centre I chose the lilac and more blue, but the pattern didn't really turn out very well, and in fact I think it is too large for the flower. So next time I will take more care with this.

I finally padded the flower out in transparent clay and then reduced. The reduction caused some minor distortion around the edges of the petals, and I think next time I will remedy this by adding more layers of transparent around the edge of the cane. Generally though I am happy with this first attempt at a flower cane.

Flowers to hearts

After my mild disappointment with the Natasha beads, I decided to go back to creating a basic flower cane. To do this I used the same technique as before to create the petal cane which I had been so impressed with and constructed it around a very basic black and white lace cane for the centre of the flower. (I just built it using a few black and white bullseye canes squashed together).

I've been trying to use what colour clay I have left over before I use new packs, so black and white wouldn't have been my first choice here, but it's all I could think of at the time. The construction went quite well, but as usual I hadn't made enough skinner blend rolls so when I constructed the flower cane the depth just wasn't there and the reduction resulted in a rather distorted flower. Again, not overwhelmed by my final piece.

So, feeling very cheesed off, I started messing around with the remaining bits of clay and came up with the bright idea of experimenting with the transparent clay I would have used for wrapping the flower cane with. Up to this point I have never worked with or baked anything with transparent clay in it. I have seen a lot of pieces of jewellery which use transparent clay to make the most fabulous beads, and I've been looking forward to trying it myself.

So with a bit of cherry red and some transparent white I marbled and shaped the clay into a heart, poked a hole through it and baked it with the aim to create a simple pendant. I wasn't really bothered too much about the shape, as the most important aspect was to see what the transparent clay would look like after the baking process.

The above photo is the baked bead. I have mixed feelings about it because I see that there are flecks or bubbles under the surface and I'm not sure if that is the usual result, or if I have messed it up in the marbling, or if I accidentally included some white clay in there. The other thing I dislike is the colour change to the cherry red clay which has gone a little pink. I actually preferred the colour combination before it was baked. The final piece doesn't look that impressive, but it probably needs to be polished so I might try this and see if it improves.