Mosaic pillow beads

I have been determined to finally produce something which I feel proud to wear, and so gazing down at the various canes I have so far created, I decided to make some beads. Over the past few weeks I have seen some rather nice examples of pillow beads on the internet. The process is manageable, if yet untested, and so I took the plunge. It is easy enough to make pillow beads - just roll a small ball of scrap clay for the inside and add two square slices of clay to each side and press the edges and corners together. I used 1/2cm pieces of the marbled log I had made previously which was about 1cm in diameter. I then cut these into half because I found that the clay was too much for the interior of the bead. In other words, that's 1/4 cm of the log piece for the interior.


I was pleasantly surprised at how nice the pillow beads looked in the end. I'm not saying that they were perfect by any means. I managed to smudge one while trying to pinch the ends. It also took quite a lot of squeezing around the edges and corners to get them into a uniform shape. But not bad for a first attempt.

I baked these in my oven in the usual way (by hanging on cocktail sticks) and when they cooled I decided to string them using the elastic cord my friend had lent to me, and using some random beads I had bought from Ebay. The result was a very pleasing bracelet, which (I admit) brought a smile to my face.

Natasha beads and a little bit extra

I don't accept defeat very well and admit I wasn't happy with my Natasha bead attempt, so when I discovered this tutorial for feather beads on Polyzine I had to try again. I picked three remaining lumps of brilliant blue, peppermint and a pale blue mix that had resulted from using the pasta machine on some leftover mixed clay. This seemed like a fairly nice combination, and besides I am now running low on my choice of coloured clay.

Following the instructions, I decided that this time I would surely succeed! Starting with a basic bullseye cane and wrapping with sheets of varying colours I finished the cane. Simple enough. You flattern the log into a square cane and then using a 'credit card' to make indentations into the log on all sides, thus creating the pattern on the inside. I'm lazy enough not to go get a credit card and instead grabbed a square cutter (part of a set I had just purchased on Ebay). The thick edge of the cutter was just right for making the indentations without slicing too thinly. Then the tricky part: cut the cane up into pieces and again use the Natasha bead technique of mirroring the internal pattern of each piece by slicing it in four. Again I couldn't really follow the instructions and while puzzling over it, I noticed one of the photos on the webpage which showed that in fact all you need to do is slice in quarters ie one slice vertical, one slice horizontal. You then literally turn all four corners inside out. It's far easier to see how this works working with the bullseye cane because you can see where the joins are!

So now, I think I've understood it, but despite this I still found it a little tricky to recontruct the four corners, because I usually find I have cut one corner slightly larger than the other. I managed to correct this by slicing off the edges to resize. This is also useful for when you smear the faces or get some bits of clay contamination, as it's so easy to just slice the edge and it is once again perfect.

I decided to experiment with the shapes of the final beads, in a smiliar way to the photos on the webpage, so I made a few oval and some I left square. I could use these interchangeably in one necklace, depending on how they look together, but I would need to find something to string them on.

At the end I was left with one small lump of clay from the bits I had sliced off and tried marbling a heart out of it. Not overly impressed with the result, I rolled a log and chopped it up into small tube shaped beads. I then poked a hole through them using cocktail sticks and dangled them from the ledges of my takeaway tray and baked them in the oven. So the result was three different shaped beads, and I was fairly pleased by all, strangely even by the little tube beads which show how effective marbling can be. The main things I would improve if I repeated the process would to be to add more colours in the original bulls eye cane and to make far more indentations to create a more intricate pattern.

Here's what I did earlier (part one)

My very first experiment using polymer clay was simple: make a bead - in a vaguely bead-like shape using one colour. Nothing fancy. For these I bought a bead roller, which is useful for creating beads of mostly the same size and shape. You can probably manage without, by cutting pieces of clay to the same size, but using the bead roller is interesting in itself. It gives you a little circular tool to press a bit of clay in and that is your measure so that all your beads end up the same size. My bead roller makes 3 different shapes.

I used cocktail sticks to pierce the bead at each end. I think you can buy special bead pins for this purpose but I'm improvising! The cocktail sticks are useful for the baking process, because you can't really lay a round bead on a flat surface in the oven, it's better to suspend them. Otherwise you could end up with a gloopy mess. To suspend the beads I've been using aluminium take-away trays and cut slits in the edge to hold the cocktail sticks. It kind of works but it's fiddly and I'm sure there are far better ways to do this.

The black and white bead at the back was the next step - trying to incorporate two basic colours and add a pattern. It's a fairly straightforward process. You start by rolling a basic bead of any colour. Then you roll out two pieces of different coloured clay with a rolling pin -they have to be the same size so you need to have something to cut it with, like a tissue blade. Then you put one piece on top of the other and roll them together to create the spiral. So this was my first cane. You then slice little pieces off the end of the cane and press them onto the outside of the bead until it is covered with little swirls. It's obvious in the photo that I haven't quite got my tissue blade to make a clean cut as the swirls have been smudged. You can also see where the pieces have touched on the surface of the bead. I've read that this can be sanded down after firing but I've yet to try it.

This is my first post...

...but not my first blog. Although I'm hoping this one lasts a bit longer than the previous. Putting this into context, it looks like I'm going to have a good deal of time on my hands over the coming months and this seems like a fine opportunity to do something with it.

Firstly, I have to admit that when it comes to polymer clay I'm a complete novice. There: I've said it. I've bought a few slabs of clay, skimmed over a few beginner's books, even got as far as acquiring a second-hand oven for the princely sum of ten quid. Hey, it's not much, but I'm on my way.